Most of us growing up as little boys looked up to our dads – they were bigger, stronger and taller than us. We were always impressed with their
abilities to lift, pull, carry and push. Did we not look up to them with awe and inspiration? Did we not want to one day be like them?
The pectoral muscles are visually the hallmark of strength on the human body. They signify power and dominance in one’s own personal space and
beyond. Most men have at one point or another pursued a stronger and more massive chest in his lifetime whether they were the recreational lifter or
Although many trainers spend countless hours on the bench press and pec deck machine, fewer and fewer actually build impressive muscularity in
that area – instead they build monumental egos. They spend entire training sessions, sometimes lasting hours, and performing set after set of every
movement known to man with little or nothing to show for it. Sure, they may become a little stronger and may gain a little muscle tissue along the way, but wouldn’t it be nice to work with a program that is both efficient and effective and produces respectable gains?
Hopefully this article will shed a little light on the infamously elusive greater pectoral development. This is not necessarily a strength program (although you will reap strength gains), but is a pectoral development program designed to increase muscle mass, development and balance from top to
bottom, inside and out. To have a strong, well-rounded chest can put the finishing touches on a physique whether it is for the beach or the stage.
Quick Anatomy Lesson
The musculature of the chest is comprised of three two muscle groups. Let’s take a look at each and there functions.
Located on the front of the ribcage, this fanlike muscle originates on the breastbone on the center of the chest and attaches to the humerus near the shoulder joint. The Pectoralis Major’s main function is to bring the humerus across the chest.
Located underneath the Pectoralis Major, this muscle originates on the middle ribs and attaches to the caracoid process of the scapula. The Pectoralis Minor’s main function is to shrug the shoulder area forward.
Athough the chest area is comprised of these two muscle groups, many exercises will influence different areas of the Pectoralis Major. Incline, flat and decline presses and fly movements will all affect this area in certain ways that can dictate development in one area over another. Additionally, the
Pectoralis Minor, sometimes activated through stabilization purposes, can also be targeted for specific development.
Chest Slab Action
Now that you know a little about anatomy and function, let’s delve into what makes an outstanding chest. The movements and routines presented are
designed to get the most out of each trip to the gym. Remember to always use good form and not to use too much weight to compromise your safety.
Flat, incline, decline, dumbbell, barbell bench and Smith machine presses:
These groups of movements normally make up the majority of trainers’ programs. The flat bench movements emphasize the middle and lower portions of the pectoralis major, the incline working mainly the upper and to a lesser extent the middle portion and the decline angle developing the lower
“pec” area. These can all be performed with a barbell, dumbbell or Smith machine – each having their own advantages.Barbells are normally utilized for maximum loads and overall mass and development. They are good to use at the beginning of a routine so that the trainer can lift heavy amounts of weight early on in their program. Dumbbells have the advantage of being used in a unilateral manner to which the trainer can not only even out imbalances from one side to the other, but also allows the pecs to work interdependently so that a trainer can bring the dumbbells together at the top of the movement for a strong contraction. A Smith machine is best utilized near the middle or end of a routine when the joints have been fatigued and proper balance and form become an issue. For barbell work, simply grasp the bar a few inches outside of your shoulder width (the best placement is a grip that positions the forearms perpendicular to the floor when the bar is lowered to the chest). Lower the bar to the upper chest for the incline version, mid to lower pec for the flat version and the lower pec line for the decline position. Without bouncing the bar, press the weight straight back up without locking the elbows. For dumbbell work, execute the movement the same way but lower the dumbbells to the sides of your chest and then simultaneously press them back up and slightly toward the center without clanging the weights together. Be sure not to lock the elbows to keep constant tension on the muscles.
Flat, incline, decline dumbbell and cable flyes
These movements will carve detail and fill out key areas of the pectoralis major – such as the inside (with cables) and outside (with dumbbells) of the muscle. Simply lie on a flat (for middle pecs), incline (for upper) or decline (for lower) with the dumbbells or cable “D” handles in your hands and your palms facing each other. For the cable version you will be using the universal cable machine and the pulleys in the lowest position. Expand out
your hands as if you were about to give someone a giant hug. Your elbows should be slightly bent to relieve tension from your joints. Lower the dumbbells or “D” rings to about chest level (or a comfortable postion) and then reverse the movement in the same hugging motion.
Cable crossovers (high, mid and low)
To get that deep inner chest development and an overall complete look to the chest, nothing beats cable crossovers. These can be performed in a
variety of ways dependent upon what the goal is. For the traditional high pulley cable crossover grasp two “D” handles from cables that are set above
your head and stand between the two cable towers. You will start with a slight bend at the elbow to relieve pressure from the joint. Step forward a foot or
two and begin with your arms wide open. Bring your arms forward and down in a huge arc as if hugging someone with your hands coming together at about beltline level. Slowly return to the starting position by raising your arms in the same arc motion. This particular motion works mainly the lower and inner pec area. Cable crossovers performed with the cables set at or around shoulder level will develop mainly the middle and inner pec area. Execute the motion the same way as described above; however, you will bring the handles directly in front of your chest instead. Squeeze and then stretch straight back.With the pulleys set to the lowest position (closest to the floor), the low pulley cable crossover will help develop the upper and inner pec region. Again, start wide and this time low with the handles and arc them up until they are in line with your upper pecs or even your chin for an intense
upper pec contraction.
Hammer Strength and machine presses
Most gyms have some version of the machine press. Just be sure to adhere to the guidelines as with presses described above – no lockout, slow on
the way down and squeeze on the way up.
Machine pec deck
Another favorite of gym goers is the pec deck machine. These are usually found with the pads for the forearms or with the long straight-arm handles (Icarian version for example). The most important point to remember when performing these movements (which is similar to the flye motions discussed
above) is to keep your shoulders back and expand the chest out at all times. This will ensure the pecs take more of the stress while protecting the
shoulders. Be sure to squeeze for a second or two to increase muscle involvement and contraction.
Incline, floor and decline push-ups
Not just for boot camp anymore, this old favorite has made a comeback lately, especially amongst functional and group trainers. The push-up for most trainers seeking a better pec landscape can normally be reserved for the end of a chest routine to push just a little more blood into that area. Variation include: incline for lower pecs (hands on a raise bench and feet on the floor), decline for upper pecs (hands on the ground and feet on a raised
bench) and floor push-ups for overall pec torture!
Parallel dips for chest
Also used for triceps mass, the dip can easily be turned into a major chest builder. Step inside a dip apparatus and grasp the parallel bars about shoulder width apart. As you lower your body, lean forward and let your elbows flare out. You should feel a stretch in your pecs on the decent. While
staying leaned forward, press back up focusing on the chest contracting. Weight can be added in the form of a dumbbell placed between your ankles by a training partner or by a weight belt with a chain to hold plates. Note: before adding weight, master the form first with just your bodyweight.
Dumbbell and barbell pullovers
Another great chest expander focusing on the pectoralis minor and overall depth is the pullover. Although many trainers utilize this movement for
isolating the back, it is also extremely effective for “finishing off” the entire pec region. For dumbbell pullovers lay perpendicularly across a flat bench
grasping the inside face of a dumbbell of moderate weight. Start with the weight directly overhead and keep a slight bend in the elbows. Lower the weight back over your head in an arc toward the floor in a very controlled manner. As you lower the weight, take in a deep breath and stretch the chest. Stretch only where you are comfortable and then reverse the motion while blowing out. Remember: deep breaths will help contract the pecs.
For the barbell version lie back length-wise on a flat bench and grasp a barbell slightly wider than shoulder width with a reverse grip. With the barbell on your chest (much like the bottom portion of a reverse-grip bench press) keep a 90 degree angle at the elbows. Rotate the weight up and over your
head in an arc toward the floor. Feel a deep stretch and then reverse the motion to rotate the barbell back toward your torso. Remember to keep the
correct angle at the elbows and breath in deeply on the decent.